We have succeeded in combining functionality and high quality at a reasonable price in the “frizz” model. Opt for a perfect diesel lift. Who says that design should not inspire? The model is equipped with sophisticated details, such as: automatic steering system or active pendulum lock to help you get through the workday safely. Equipped with the Lombardini 2-cylinder Focs engine, the stage purrs like a kitten through the orchards. The engine has enough power to impress in the field. Due to the good sound insulation, the noise of the engine is not disturbing when working with the stage.
Basic model
The following components are included in the basic equipment:
Optional
Front forklift – rear forklift – chain conveyor
The front and rear stacker lift a maximum weight of 500 kg. The inclination of the rear stacker is directly connected to the inclination of the platform and thus allows easy transport of the full large box on the chain conveyor on the rear stacker, and a simple parking of the large box even on slopes.
Automatic slope compensation in the direction of travel – 30%
With the automatic slope compensation in the direction of travel, the working platform in the steep slope always turns straight and you can also manually set the position of the platform on the control panel.
Automatic steering system
The automatic steering system works with ultrasonic sensors. The angles of the ultrasonic sensors can be variably adjusted. In automatic mode, this system becomes active and guarantees automatic steering in your lane.
All wheel drive
With the extension of an all-wheel drive, the front axle is also driven by a cardan shaft. This will keep you going even in difficult terrain.
Four-wheel steering and separate steering
With the four-wheel steering you have an even more effective turning radius and can, for example, comfortably from the
Change one to the other tram.
Furthermore, you can use the separate steering wheels in
let lateral slopes in the direction of the mountain peak to prevent drifting.
Drawbar including street homologation
Road homologation entitles you to tow the machine on the tractor by road. You will receive the necessary documents for street legal registration as well as:
Drawbar including freewheel system of the front wheels
Taillight set including brake pads.
Radio with CD player and USB port
The car radio has a CD player with MP3 playback and a USB port and also has a 4 X 40-Watt output.
Storage for bad fruit
This is a bracket, which is mounted on the rear bracket of the stage railing. Then you can put 3 plastic boxes each with about 40kg bad fruit.
These boxes can then be conveniently emptied into a box at the end of the line and thus
you save the reading of the fall from the ground.
Drawer extension
With the drawer extension of 30cm per side, working in wider orchards, e.g. Relieved cherries.
The spacers can be attached or removed with just a few simple steps.
Twin tires on the rear axle
To get on even in steep or very wet terrain, twin tires can be mounted on the rear axle.
This helps especially in regions where a lot of precipitation falls, to ensure a good progress and the ground pressure in
to minimize the tramline.
Toolbox
This is a box in which you can stow everyday small items; such as: scissors, binding material, etc.
Harvest box
Just as long as the big box is still empty, the harvest box makes it easier to place the apples in the big box.
Tire sealant
The tire sealant prevents leakage of air in coat punctures.
WARNING: The tire sealant does not replace regular tire pressure checks and natural air leakage over extended periods of time.
Chassis
Lifting platform
This is a simpler version compared to the top model and does not have an independent control unit but uses the tractors hydraulic system. Complete with flow regulator to vary the speed of rotor rotation from zero to 800 rpm. Application is recommended on tractors with hydraulic pump greater than 30 l. Characteristics
The WINTEX 1000s is an automatic soil sampler for soil samples to the depth of 30 cm. About 300 sticks and 20 soil samples per hour ensure fast and efficient sampling. Compared to collecting soil samples manually, the number of soil samples and the acreage covered increase significantly without hiring extra help. Sampling happens always in the exact same depth which can be adjusted infinitely from 0-30 cm. This ensures highly homogeneous samples and reduces physical strain to a minimum.
It is made up of an hopper with adjustable separators to adjust the potatoes level’s height before the cups belts. The channel of the cups has been projected for all potato’s shapes and dimentions. Elevator belts have two lines of interposed scoop cups and adjustable vibrators behind them to guarantee a perfect taking. The wedge - shaped furrow-shares form a drill that receives the potatoes perfectly in its middle. Thanks to the covering discs with a continuous adjustment it is possi
Since 1999 the WINTEX 1000 is our most-sold automatic soil sampler for soil samples up to the depth of 25 cm. Especially the ease of use, its consistency and sampling speed is highly appreciated by our customers. Up to 300 sticks and 20 soil samples per hour make soil sampling fast and efficient. The number of soil samples and the acreage covered increase significantly compared to soil sampling by hand. There is no need for hiring extra help and physical strain is minimized.