Kjaergaard Maskinfabrik has developed a new non-submerged model of our KSF fish pumps. Before pumping begins the pump must be filled with water. By doing this the KSF LM achieves the same property as its sister, the KSF. The pump is automatically filled with water when it is switched on.
Compared to the KSF fish pump which is driven by an oil motor the KSF LM is driven by an electric motor. The electric motor is connected to a frequency transformer, which enables you to control the revolutions per minute and hence control the quantity of smolt pumped, without difficulty.
Furthermore the KSF LM is delivered with a remote control in order to be able to start/stop or control the revolutions per minute in distances up to 100 metres.
The GrowerSELECT® HSWS-01 sprinkler control unit is a programmable and automatically increases the run time and frequency of the system’s operation as needed based on temperature set points. An available data plug allows settings from a controller to be stored and quickly replicated on other control units across the farm. The controller operates three different stages of cooling intervals based on the temperature inside ahe barn.
The GrowerSELECT G-Logic control pan is an end control pan that features a non-mechanical capacitive sensor to detect feed levels, increasing reliability and eliminating the possibility of a mechanical switch that can wear out and stop working. The G-Logic sensor also eliminates the need for a fabric diaphragm. Products Details
The Loftness GL System 10 Grain Bag Loader (GBL 10) is a perfectly balanced and controlled workhorse. All across North America, millions of bushels of grain have been loaded and stored because of its ease of use and rugged reliability. It can load a 10-foot x 300-foot grain bag in just over 30 minutes. Thats about 13,000 bushels. Every feature of the GBL 10 is designed to help achieve controlled and predictable results, load after load.
Pictured is our completely assembled foam mark control box with the wire harness. This kit includes everything you would need to create foam, less the mixing chambers, hoses and a tank.