Soil moisture sensor Thetaprobe ML3. Measuring range 0-50% vol. Accuracy +/- 1%. With 4 pins, length 60 mm, Ø 3.2 mm. Output signal 0-1 Vdc. Inclusive temperature meter range -20...+60 °C, accuracy +/- 0.5 °C over 0...40 °C. Exclusive cable. Warranty 5 years.
EC-probe for soil salinity measurements, standard set for measurements to 1 m depth. Technical Specification Maximum measuring depth: < 100 cmMeasured parameters: conductivity, temperatureMeasuring accuracy: 0.05 mS/cmMeasuring principles: direct electrical (bulk soil) conductivity + temp.Measuring range
The Thetaprobe is also available in the form of a profile probe for use in thin-walled tubes that are installed in the soil. The profile probe is fitted with 6 measuring elements with a measuring range of 100 cm so that the soil moisture content can be measured at different depths within a vertical soil profile. The probe measures with an accuracy of ± 3% in a thin-walled tube and has a measuring volume of ± 1.5 litres at each profile depth. The profile probe can be used as a
The kit comprises an SM150T* Soil Moisture Sensor, a dedicated HH150 Moisture Meter and a carry case. The cable and connector are watertight – an essential requirement for potentially wet environments. The HH150 Meter displays volumetric water content (% volume). Please note that although the SM150T Sensor has a built-in temperature sensor, the HH150 Moisture Meter does not measure or display temperature.
Everything you need to manually install access tubes for soil moisture sensors! AMS has specifically developed the Soil Moisture Installation Kit to aid in the installation process of access tubes for various types of soil moisture sensors. The auger head provided in this kit is held to a tight tolerance and provides a precision borehole for both standard & slurry installations. The standard auger kit comes with a 65mm auger head, although 60mm & 55mm auger heads are available upon reque