The Z125 GFP Closed FluorCam is designed for both chlorophyll fluorescence and other fluorescent protein imaging. The basic system of the Z100 FluorCam – Closed (CCD camera, four fixed LED panels) is supplemented here by a fully motorized and software-controlled filter wheel and appropriate filter sets for the detection and imaging of green fluorescent protein (GFP) in standard system, red-shifted GFP, or yellow fluorescent protein (YFP) (optional). The blue emitting and red fluorescent protein can be detected and imaged in absence of chlorophyll. The device configuration also provides user-friendly and quick transition between the GFP and chlorophyll fluorescence detection and imaging.
The Z125 GFP FluorCam – Closed System similarly to the Z100 FluorCam – Closed System consists of a high resolution and long integration time TOMI-2 CCD camera (1360×1024 pixels), 4 fixed LED panels that illuminate the sample, imaging software with protocols and 7 position filter wheel for imaging chlorophyll and GFP. Filters for other fluorescent proteins are optional. The LED panels provide uniform irradiance over samples up to 10 x 10 cm – suitable for small plants, detached leaves, petri plates with seedlings or algal cultrures, etc. The system allows dark adaptation and includes a high-performance PC and a comprehensive software package for control of the system, data aquicsition and analysis.
Measured Parameters:
For hydroponic greenhouses, we have our HS HANGING SYSTEM with the highest level of technology and the most complete structures. This system is hung from the structure of the greenhouse, allowing the crop to be in the best position for manual work to be carried out on it, with a perfect slope for the collection of what is drained off.
Different versions: Electric single phase (220 V) or three-phase (380 V). Features Steering wheel cast Guide precision blade brass, up and down in series Rubber cover without glue - Easily replaceable Carriage O
The model chipper 20-40 CHIPPER ENERGY is one of those chipper machines designed by Gandini mechanics to service the forestry sector, as it is capable of producing high quality wood chips used in the energy sector. The design of the chipper CHIPPER ENERGY 23-42 was based on a system of cutting blades on the drum, while all the operations that can be performed for the production of wood chip material can be controlled electronically. The CT 23-42 is equipped with modern NoStress and noblock and a
The model chipper 30-60 CHIPPER ENERGY is one of those chipper machines designed by Gandini mechanics to service the forestry sector, as it is capable of producing high quality wood chips used in the energy sector. The design of the chipper CHIPPER ENERGY 30-60 was based on a system of cutting blades on the drum, while all the operations that can be performed for the production of wood chip material can be controlled electronically. The CT 30-60 is equipped with modern NoStress and noblock and a