Self Propelled windrow turners sized to meet the production needs of small to medium compost operations. Features Choice of four sizes to match the required processing capacityChoice of standard drive system or pad saver
Shading System is a major part to create a comfortable environment for greenhouse plants. It mainly made of steel framework, internal/ external shading screen, pull screen lines, screen-line roller, curtain rods and gear-rack driving system.
For the internal shading system, the shading screen will reflect part of the sunshine and let it diffuse evenly on the plants in hot summer; while the screens will keep warm air inside and keep greenhouse humidity level in cold winter. For the external shading system, the shading nets can prevent greenhouse exposed to direct sunlight, effectively cool down the inside temperature and avoid light burning plants.
This system decreases the irrigation frequency, increase the quality of the fruits and extend the harvest time of the plants.
Self Propelled windrow turners sized to meet the production needs of small to medium compost operations. Features Choice of four sizes to match the required processing capacityChoice of standard drive system or pad saver
OnTrac2+ is a low-cost way of adding assisted steering of vehicles based on GPS navigation without interfering with hydraulics. It can be used with tractors, harvesters and other vehicles equipped with assisted steering. The system significantly improves steering precision and helps reduce operator fatigue. Products Details
SolaWrap, also known as Polydress LP Keder, enables energy capture by allowing light energy to pass through the system while scattering the light energy so as to eliminate burn spots and shadowing within the structure. The unique double-layered system encloses air burls or pockets of air which act as light ray diffusers. The diffused sunlight scatters more evenly than does direct sunlight as it passes through traditional structure films and materials. SolaWrap allows 83% of sunlight to both pass
Fuel System Repairs If the engine seems not to be getting fuel, turn the fuel line shutoff valve to “off,” then remove the clamps that connect the line to the gas tank and carburetor. Open the valve, and see if fuel drains at a decent rate into a container. If not, clean out the line, and any screen in front of the carburetor intake, or replace the fuel filter. Reattach the line, and turn on the fuel valve. If the engine is still not getting gas, the problem may be in the carburet