Lowerable cutting factory floor, autom. Chain lubrication, spaces 70-168 cm, approx. 1600 bales pressed,.width - working width (cm): 2.00 m.Number of knives: 15 .Equipment: Header , Rolling compressing rod, Cardan shaft , Bale ejector , variable chamber-belt, Web binding.Set of Tires:500/55-22.5 / 90 %
Tracked Fencing Machine offers massive savings in time and labour. Operate in field conditions where wheeled machines would flounder. If you encounter soft stubbles, productive grassland or peat bogs, this outfit has to be a major consideration. Product Details Many Options Available3 point linkageFull widt
The HEIZOHACK feed control HE 002 controls the feed motion of the wood to be made into chips irrespective of the drive performance. The integrated operating hours counter stores the daily and total numbers of hours. Auto reverse is available for the stress control to clear the drum. All manually loaded wood chipping machines with a chassis are products, which meet the requirements of the Equipment and Product Safety Act and bear the „Tested Safety“ mark. All these machines have
Overall width of 780mm allows operators to pass through garden gates, climb steep slopes, and work in the tightest and roughest of worksites.
Standard 3-point-linkage 200 - 300 - 400 - 600 - 800 liters polyethylene tank. Integrated wash tank and chemical circuit wash-system . Removable suction filter with valve - Glycerin gauge. Three-way valve - Hydraulic stirrer. Spraying pumps: Comet APS 41 - APS 71 - APS 96 / Bertolini PA 530. Pressure regulators with manual by-pass/shut-off lever 3 outlets. Professional use - supplied fully assembled.