Electronic tensimeter, measuring range 0-999 hPa, accuracy 2 %, digital display. For tensiometer tubes with a diameter between 21.5 and 23 mm. Inclusive 9V battery and measuring needle and carrying bag. The electronic tensimeter is a portable pressure sensor in a bag for measurement of the moisture tension in the soil, measured through a tensiometer tube placed in the soil. The measuring device can be moved from tensiometer tube to tensiometer tube allowing an unlimited number of measurements over a short period of time. The hypodermic needle of the tensimeter is fitted on the tensiometer tube through the silicon stopper after which the moisture tension can be read. The meter has a measuring range of 0-1000 hPa with an accuracy of less than 2%. Tensiometer tubes are available in various lengths.
For hydroponic greenhouses, we have our HS HANGING SYSTEM with the highest level of technology and the most complete structures. This system is hung from the structure of the greenhouse, allowing the crop to be in the best position for manual work to be carried out on it, with a perfect slope for the collection of what is drained off.
Different versions: Electric single phase (220 V) or three-phase (380 V). Features Steering wheel cast Guide precision blade brass, up and down in series Rubber cover without glue - Easily replaceable Carriage O
The model chipper 20-40 CHIPPER ENERGY is one of those chipper machines designed by Gandini mechanics to service the forestry sector, as it is capable of producing high quality wood chips used in the energy sector. The design of the chipper CHIPPER ENERGY 23-42 was based on a system of cutting blades on the drum, while all the operations that can be performed for the production of wood chip material can be controlled electronically. The CT 23-42 is equipped with modern NoStress and noblock and a
The model chipper 30-60 CHIPPER ENERGY is one of those chipper machines designed by Gandini mechanics to service the forestry sector, as it is capable of producing high quality wood chips used in the energy sector. The design of the chipper CHIPPER ENERGY 30-60 was based on a system of cutting blades on the drum, while all the operations that can be performed for the production of wood chip material can be controlled electronically. The CT 30-60 is equipped with modern NoStress and noblock and a