Manufactured from High Quality QSt/E Steel for Front mounting onto professional Front Mowers with 2point linkage. Linkage designed for high lift to clear kerbs. Gearbox mounted to the rear of the hood complete with integrated over run clutch for 2500 r.p.m. Belt protection with tension measuring slot. Shackle “M” Carbide flails to ensure long life, clean cut and maximum shredding using less power. Spiral Rotor with specially formed flail lugs to protect against damage from obstacles, bearings protected against dirt, wear and tear. Roller with rounded edges to preserve the soil and turf and to carry the flail with variable height adjustment. Easy to use variable height adjustment.
Dimensions 15” x 6 1/4” x 8 1/2”. Continuous duty, weatherproof motor and dual-sealed bearings. Compact 1.5” Discharge, High Head, High Flow. 1.5HP 3450 RPM. Circulates 10500 GPH. Factory warranty 1-3 years (dependent on seal selection). Suggested use: hydroponic farming, aquaculture, large marine and pond systems requiring high pressures. Volt: Option of 115 v. corded or 230 v. un-corded. Supplied with 1.5” super seal unions and anti-vibration pump pad.
The heat treatment of wood is performed by using ISVE patented systems that ensure a gradual and progressive darkening of wood thanks to the combined action of the vacuum and high temperatures. Boards and semi-finished wood treated in this manner are completely stabilized and sterilized, in warmer colour tones that respect the natural grain of wood, with noticeable aesthetic results. A particularly pleasing added value for those who produce parquet and garden furniture and those dedicated to ven
Built on the FT principle these quality mowers are interchangeable cassette systems with one minute changeover giving options to fit 8 different heads including scarifiers, verticutters, brushes, spikers, slitters as well as 6 or 8 bladed cutter cassettes. Available as 26” (66cm), 30” (76cm) and 34” (86cm) widths. Features and Benefits
The rugged, simple design of the 972 Flail Chopper provides dependable performance. Two rows of double-edged knives cut the standing crop and lift it to a transfer auger. The 12-in., 300-rpm auger then moves the material to a knife-equipped fan where three blades size the forage even further.