The Steketee Multispray is specially developed for weed control in all row crops. This method enables applying Round-Up on crops. The Multispray is best mounted on the tractor front in combination with the Steketee Front Linkage Device. The Multispray consists of a bearer with two furrow wheels and drawbar points for mounting on the front linkage device. Elements consisting of adjustable U-profiles are fitted to the bearer. This U-profile protects the crop from the pesticide used. A spraying set with self-closing spray nozzle is mounted in between these U-profiles. The self-closing cap has a Lo-Drift nozzle. Utilising a Lo-Drift nozzle reduces the spray drift considerably. The spray set can be continuously adjusted in height. The machine is completed witch a header plus close textured filter. The Multispray assembly is protected by toothed plates at the front and lateral sides.
Burner nominal power [kW]: Max 1186. Productivity [ton/h]: 4,5 - 5,5. Weight [kg]: 3340. Grain feeding system electrical motor [kW]: 1,10. Main fan electrical motor [kW]: 15,00. Burner fan electrical motor [kW]: 1,10. Chain conveyor electrical motor [kW]: 0,25. Theoretical consumptions for diesel [ ldiesel/tonsoya]: 19. Theoretical consumptions for gas [ m3gas/tonsoya]: 19. Theoretical consumptions for LPG [ lLPG/tonsoya]: 28.
The Reese Heliwrapper is a unique patented machine that is designed for the larger farmer or contractor. It is a tractor mounted continuous tube bale wrapper designed primarily for round bales. Quick to set up and easy to operate it needs only a tractor capable of transporting the 840kg (1850lbs) weight by cat II 3 point linkage. This machine uses the tractors hydraulic system as...
Gyroscopic machine for Pergola, espalier system and Guyot. Vertical bar with a double blade cutting bar (working cut of 1600 mm). Horizontal bar with a double blade cutting bar (working cut of 850 mm). Hydraulic tilt adjustment with 1 piston. Hydraulic height adjustment with 1 piston. Hydraulic adjustment of the head bar with 1 piston. Hydraulic adjustment of the side bar with 1 piston. Antishock on horizontal bars 5-controls hydraulic distributor. Powered by 2 hydraulic engines (it required 150
Lynex TX2500 is a 250 hp tool carrier on tracks. TX2500 has the markets lowest center of gravity and maximum ground clearance in the same time. The cab is placed in rear linkage and can be removed without tools. The machine is remote controlled as the SX1000 the new machine has linkage at both ends and can run with all tools for. example a mulcher. Power loss on transmission are among the lowest, 245 hp at the Front-PTO. The machine is also equipped with a turbine clutch to take the shock of the