The micro-sprayers used in greenhouses, tree orchards, and open fields, called mini-sprinklers or micro-jets, are small plastic emitters. They can be of various mechanisms (capped with a rotating needle, non-capped with a swivel spreader, or with a deflector) with a wide range of flow rates and water diameters. The irrigation water needs to be filtered before it enters the system.
The axial nozzles are designed as complete cone spiral nozzle consisting of a casing and an insert. Correctly assembled, the nozzles distribute the water with a spray angel of 120°, where the water flow rate depends on the operational pressure. We recommend checking the operation conditions, as nozzle distance and height have to be chosen according to the respective plant requirements.
ALPHA JECT micro 1 Noda has been developed in response to fish farmers’ needs in the Mediterranean to fight against the most common viral disease affecting farmed sea bass in the Mediterranean. PHARMAQ is committed to the continuous development and supply of innovative health solutions for fish farmers globally. Product Details
The HR-50 Humidifier is easy to install. Connect direct to water supply or to water tank. It has a carry handle for easy mobility. With a wide range of applications: Greenhouses, Propagation room, Reseach Chamber, Storage Room, Mushroom and Orchid cultivation. Product Details
The author is an associate professor in the department of biological systems engineering located at the Irrigated Agriculture Research and Extension Center in Prosser, Wash. LEPA being used on a row crop using drag socks to minimize erosion to the furrow dikes that limit water movement in the furrows. When center pivots were first introduced, they used high-pressure impact sprinklers on top of the pipe. These sprinklers needed 40 to 60 pounds per square inch (psi) to operate properly, w